Lab Electrical Water Distiller Machine Water & Electric Saving

Certification: CE
Electric Tension: AC 220V / 50Hz 3.5kw
Material: Stainless Steel
Application: Hospital, Health Center, Lab, Research Institute
Distilled Wateroutput: 10 Liters/ Hour
Shape: Vertical or Wall Mounted Type
Gold Member Since 2004

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
YF-10L/H
Operation System
Automatically Controlled
Over Current Protection
Yes
Lower Water Protection,
Yes
Transport Package
Carton Boxes
Specification
440× 310× 1070mm
Trademark
YF
Origin
Ningbo
HS Code
84192000
Production Capacity
5000 PCS/Year

Product Description

Vertical or Wall Mounted Electrical Water Distiller Machine (Water and electric saving type)

General

The distilled water device can be mounted on the wall or floor-stand at the ground, designed to minimize the economic cost to get efficient high quality distilled water automatically. Pure distilled water is indispensable for the analysis use to the hospitals, health centers, research institutes and laboratories.

The apparatus is specifically designed for the distilled 
water self-prepared for the above units. The distilled water is totally meet the requirement of <GB / T6682 - 2008 water for analytical laboratory use-Specification and test methods>specified in the national standard CLASS III water standard.


 
Characteristics

· The apparatus is automatically controlled, without supervision.
· Nice appearance, and can be viewed the inside of the evaporation container from the upper glass frame.
· Water and electric saving type, 15% water can be saved compared to the old type, 20% electric can be saved but the output of water can be guaranteed.
· Automatically cut the power if the over current happened.
· Lower water protection, power will be cut off if the water level beneath the heating tubes.
·  A utility patent has been obtained. 

Lab Electrical Water Distiller Machine Water &amp; Electric Saving



Workflow

Raw water flow into the bottom of the condensing tube along the loop, eventually entering the evaporation pan, the water level of which is measured by the overflow dam. The steam in the condensing tube will drop down and pre-heat the raw water raising in the column, which is more economical, and also can dissolve the steam into the water. The exhausting steam will be released from the entrance, and the steam generates from vaporized pan is flowed through the guide plate then reach the condensing tube, finally the distilled water obtained.

Material
The evaporation pan, the condenser pipe and the guide plate are fully stainless steel. The out lid is made of heat-resistant borosilicate glass.

Technical Data

 
Model YF-5L/H YF-10L/H YF-20L/H
Output 5 Liters/ hour 10 Liters/ hour 20 Liters/ hour
Power supply AC 220V / 50Hz AC 380V / 50Hz AC 380V / 50Hz
consumption 3.5KW 6KW 12KW
Net weight 8kg 11kg 16kg
Weight with full water 11kg 16kg 25kg
 Dimension 410×27960mm 440×310×1070mm 46330×1120mm

Send your message to this supplier

*From:
*To:
avatar Mr. Mike He
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now